广州市生活饮用水地表水源地微量元素调查

对广州市秀全、巴江、江村、石门、西村、刘屋洲、南洲和沙湾等主要生活饮用水地表水源地中钼、钴、铍、硼、锑、镍、钒、钛、锡、银和钡等微量元素含量水平进行了调查,并采用单因子污染指数法和内梅罗综合污染指数法对微量元素水质进行了评价。结果表明,硼和锡在所有地表水源地均未检出,铍在部分地表水源地有检出,其他检测项目在所有地表水源地均有检出。整体而言,微量元素含量水平不高,地表水源地由北往南微量元素内梅罗指数呈逐渐降低态势,南部水源地水质优于北部水源地。巴江和西部水源地镍含量相对较高,电镀企业排污监管力度有待进一步加强。     

European scale application of atmospheric reactive nitrogen measurements in a low-cost approach to infer dry deposition fluxes

A European scale network was established in 2006 as part of the NitroEurope Integrated Project to infer reactive nitrogen (Nr) dry deposition fluxes, based on low-cost sampling of gaseous and aerosol species and inferential modelling. The network provides monthly measurements of NH₃, NH₄⁺, HNO₃ and NO₃⁻, as well as SO₂, SO₄²⁻, HCl, Cl⁻ and base cations at 58 sites. Measurements are made with an established low-cost denuder methodology (DELTA) as a basis to: (1) examine temporal trends and spatial patterns across Europe, (2) improve and calibrate inferential modelling techniques to estimate exchange of Nr species, (3) provide best estimates of atmospheric dry N deposition, and (4) permit an analysis of net GHG exchange in relation to atmospheric and agricultural N inputs at the European scale. Responsibility for measurements is shared among seven European laboratories. An inter-comparison of the DELTA implementation by 6 laboratories at 4 test sites (Montelibretti, Italy; Braunschweig, Germany; Paterna, Spain and Auchencorth, UK) from July to October 2006 provided training for the laboratories and showed that good agreement was achieved in different climatic conditions (87% of laboratory site-means within 20% of the inter-laboratory median). Results obtained from the first year of measurements show substantial spatial variability in atmospheric Nr concentrations, illustrating the major local (NH₃) and regional (HNO₃, NO₃⁻, and NH₄⁺) differences in Nr concentrations. These results provide the basis to develop future estimates of site-based Nr dry deposition fluxes across Europe, and highlight the role of NH₃, largely of agricultural origin, which was the largest single constituent and will dominate dry Nr fluxes at most sites.     

Fire ant venom alkaloids act as key attractants for the parasitic phorid fly, Pseudacteon tricuspis (Diptera: Phoridae)

The phorid fly, Pseudacteon tricuspis Borgmeier, is an introduced parasitoid of imported fire ants, Solenopsis spp., in the USA. Although the assumption that phorid flies use fire ant alarm pheromones for host location is probably true, we demonstrated in a previous study the possible involvement of other ant semiochemicals in the response of P. tricuspis to fire ants. This study was conducted to determine the glandular sources and identity of the semiochemicals mediating this interaction. First, we tested the electroantennogram response of P. tricuspis to extracts of key body parts and glands of workers of the red imported fire ant, S. invicta Buren. The results confirm that the poison (venom) gland/sac is the key source of compounds which elicited strong antennal activity in P. tricuspis. Follow-up studies were conducted by using a combination of bioassay-guided fractionation and behavioral bioassays to test the hypothesis that attraction of this parasitoid to fire ants is mediated by venom alkaloids. The results confirm the response of P. tricuspis to physiologically relevant amounts of the two venom alkaloid fractions (cis and trans alkaloid fractions) of S. invicta. Further analysis by coupled gas chromatography–electroantennogram detection revealed nine venom alkaloid components including two novel 2,6-dialkylpiperideines that elicited significant antennal activity in P. tricuspis. This is the first demonstration of the role of venom alkaloids of ants as attractants for their natural enemies. We propose a semiochemical-mediated host location mechanism for P. tricuspis involving both alarm pheromones and venom alkaloids. The ecological significance of these findings, including the attraction of male P. tricuspis to fire ant venom alkaloids, possibly for mate location, is discussed.     

Nanomaterials for environmental burden reduction, waste treatment, and nonpoint source pollution control: a review

Nanomaterials are applicable in the areas of reduction of environmental burden, reduction/treatment of industrial and agricultural wastes, and nonpoint source (NPS) pollution control. First, environmental burden reduction involves green process and engineering, emissions control, desulfurization/denitrification of nonrenewable energy sources, and improvement of agriculture and food systems. Second, reduction/treatment of industrial and agricultural wastes involves converting wastes into products, groundwater remediation, adsorption, delaying photocatalysis, and nanomembranes. Third, NPS pollution control involves controlling water pollution. Nanomaterials alter physical properties on a nanoscale due to their high specific surface area to volume ratio. They are used as catalysts, adsorbents, membranes, and additives to increase activity and capability due to their high specific surface areas and nano-sized effects. Thus, nanomaterials are more effective at treating environmental wastes because they reduce the amount of material needed.     

Arsenic speciation for the phytoremediation by the Chinese brake fern, Pteris vittata

Arsenic (As) speciation for the phytoremediation by the Chinese brake fern was studied. In particular, the mechanism of how plants induce compounds containing thiol (SH) and proteins by As exposure in terms of the relationship between As and phosphate uptaken into plant cells was examined. Pteris vittata callus could efficiently reduce As(V) to As(III) by the rapid introduction of reductase and synthesize thiols leading to phytochelatins production. Furthermore, Pteris vittata could control phosphate concentration in the cells corresponding to the concentration of arsenite and arsenate. To our best knowledge, this is the first report to show the mechanisms of such high As tolerance of Pteris vittata using their callus in terms of in vitro approach for the analysis of As speciation and metabolism route.     

钢铁企业固体废弃物资源化利用浅析

固体废物做到资源化即通过综合利用,使有利用价值的固体废物变废为宝,实现资源的再循环利用,是固体废物污染控制一直努力方向。钢铁联合企业生产过程中产生的固体废弃物量大、面广,如对其进行资源化利用不仅可获得好的效益,同时也解决了环保难题。通过借鉴国内外钢铁企业固体废弃物资源化利用成功技术,使我们在开展环境影响评价工作中对钢铁企业固废的资源化利用提出一些切实可行的控制措施。     

Application of Pesticide Sprays to Fresh Produce: A Risk Assessment for Hepatitis A and <Emphasis Type="Italic">Salmonella</Emphasis>

The purpose of this study was to quantify the transfer of viral and bacterial pathogens in water used to dilute pesticides sprayed onto the surfaces of cantaloupe, iceberg lettuce, and bell peppers. The average percent transfer of bacteria was estimated to range from 0.00021 to 9.4%, while average viral transfer ranged from 0.055 to 4.2%, depending on the type of produce. Based on these values the concentrations of hepatitis A virus (HAV) and Salmonella in water necessary to achieve a 1:10,000 annual risk of infection were calculated. Under worst case scenario assumptions, in which a pesticide is applied on the same day that the produce is harvested and when maximum transfer values are used, concentrations of 1.5 × 10⁻³ CFU Salmonella or 2.7 × 10⁻⁷ MPN HAV per 100 ml of the water used for application would result in 1:10,000 annual infection risk to anyone who consumes the fresh produce. If harvesting does not occur until at least 14 days after the application, to produce the same risk of infection, the numbers of Salmonella in 100 ml of water used to dilute the pesticides will be greater by up to five orders of magnitude, while the HAV numbers will have increased by up to two orders of magnitude. Based on the reported concentrations of enteric viruses in surface and ground waters in the United States, a 1:10,000 annual risk of infection could easily be exceeded with some groundwater sources used in the United States. To reduce the risks associated with the consumption of fresh produce, water used to prepare pesticides in spray applications should be evaluated for its microbiological quality.     

Improvement of soil aggregate stability by repeated applications of organic amendments to a cultivated silty loam soil

The objective of this study was to compare the effects of repeated field applications of three urban compost amendments and one farmyard manure amendment over a 9-year period on aggregate stability in a silty loam soil initially characterized by low clay and initial organic matter contents and poor aggregate stability. Three different aggregate stability tests with increasing disruptive intensities (fast wetting > mechanical breakdown > slow wetting tests) and different disaggregation mechanisms, were used. All of the amendments, which were applied at approximately 4 Mg C ha⁻¹ every other year, increased the organic carbon content and improved the stability of the aggregates against the disruptive action of water, as determined by each of the stability tests. However, the year-to-year variations in the aggregate stability that related to factors other than the organic inputs were greater than the cumulative increase in aggregate stability relative to the control. The positive effects of the tested amendments on aggregate stability were linked to their contribution to soil organic C contents (r = 0.54 for the fast wetting test and r = 0.41-0.42 for the mechanical breakdown and slow wetting tests; p < 0.05). The addition of urban composts had a larger positive effect on aggregate stability than farmyard manure at the majority of sampling dates. The addition of biodegradable immature compost, such as municipal solid waste (MSW), improved the aggregate stability through an enhanced resistance to slaking. The addition of mature composts, such as the co-compost of sewage sludge and green wastes (GWS) or biowaste compost (BW), improved the aggregate stability by increasing interparticular cohesion. The MSW compost was the most efficient in improving aggregate stability during the first 6 years of the experiment (average improvements of +22%, +5% and +28% in the fast wetting, mechanical breakdown and slow wetting tests, respectively, compared to the control treatment); this result was likely due to the larger labile organic pool of the MSW compost that was highly effective at stimulating soil microbial activity. After the first 6 years, the two other composts, GWS and BW, became more efficient (average improvements of +25%, +61% and +33% in the fast wetting, mechanical breakdown and slow wetting tests, respectively, compared to the control treatment), which was probably linked to the greater increase in soil organic C contents. Therefore, the application of urban compost to silty soil that is susceptible to water erosion was effective at improving aggregate stability and thus could be used to enhance the resistance of soil to water erosion.     

Effects of compression ratio,swirl augmentation techniques and ethanol addition on the combustion of CNG–biodiesel in a dual-fuel engine

The diminishing resources and continuously increasing cost of petroleum in association with their alarming pollution levels from diesel engines has led to an interest in finding alternative fuels to diesel. Emission control and engine efficiency are two of the most important parameters in current engine design. The impending introduction of emission standards such as Euro IV and Euro V has forced research towards developing new technologies for combating engine emissions. This paper examines the effects of compression ratio, swirl augmentation techniques and ethanol addition on the combustion of compressed natural gas (CNG) blended with Honge oil methyl esters (HOME) in a dual fuel engine. The present results show that the combustion of HOME and 15% ethanol blend with CNG induction in a dual-fuel engine operated in optimized parameters at an injection timing of 27° Before Top Dead Centre and a compression ratio of 17.5 resulted in acceptable combustion emissions and improved brake thermal efficiencies. The implementation of swirl augmentation techniques increased brake thermal efficiencies (BTEs) and considerably reduced combustion emissions such as smoke, HC, CO and NO_x. The addition of ethanol also increased BTEs. However, at more than 15% of ethanol in HOME, NO_x emissions increased dramatically.     

Fuel efficiency improvement of a dual-fuel engine fuelled with Honge oil methyl ester (HOME)–bioethanol and producer gas

Renewable and alternative fuels have numerous advantages compared with fossil fuels as they are renewable and biodegradable and provide food and energy security and foreign exchange savings besides addressing environmental concerns and socio-economic issues (Yaliwal et al. 2013. International Journal of Sustainable Engineering, doi:10.1080/19397038.2013.801530. Zhu et al. 2011a, Applied Thermal Engineering 31 (14–15): 2271–2278; Zhu et al. 2011b, Fuel 90: 1743-1750; Banapurmath, Tewari, and Hosmath 2008, Renewable Energy 33: 2007-2018; Banapurmath 2009, “Performance, Combustion and Emission Characteristics of a Single Cylinder Direct Injection CI Engine Operated on Dual Fuel Mode Using Honge Oil and Producer Gas.” PhD thesis, 1–195; Banapurmath et al. 2011, Waste and Biomass Valorization 2: 1–11). In this context, the main objective of the present work is to study methods of biofuel production such as Honge oil methyl ester (HOME) using a conventional transesterification process and bioethanol from the Calliandra calothyrsus shrub using a new pretreatment method known as hydrothermal explosion. Further, experimental investigations were carried out on a single-cylinder, four-stroke, direct-injection stationary diesel engine operating in a dual-fuel mode using HOME, bioethanol and producer gas combinations to determine its performance, combustion and emission characteristics. The performance of the dual-fuel engine was analyzed at optimized engine conditions. HOME-Bioethanol (BE) blends such as HOME+ 5% bioethanol (BE5), HOME+ 10% bioethanol (BE10) and HOME+ 15% bioethanol (BE15) were prepared by adding bioethanol to HOME (on volume basis) in different proportions ranging from 5 to 15% with an increment of 5%. In this present work, the effect of different BE blends on the performance of producer gas fuelled dual fuel engine was studied. Experimental investigation on dual fuel engine using BE5-Producer gas operation resulted in up to 4–9% increased brake thermal efficiency with decreased hydrocarbon (HC), carbon monoxide (CO) and marginally increased nitric oxide (NOx) emission levels compared to HOME-Producer gas, BE10-producer gas and BE15-producer gas mode of operation. However, it was observed that, the overall performance of BE-producer gas operation was found to be lower compared to diesel-producer gas operation.